Mold Release Agent(frp) - List of Manufacturers, Suppliers, Companies and Products

[Case] Continuous operation by reducing the formation of flash in extrusion molding nozzles.

Apply to the mouthpiece on-site. Simply air dry at room temperature to reduce haze. Significant improvement in productivity.

【Issue】 - Currently, mold release occurs after 5-10 minutes of continuous operation. We would like to extend this to approximately 60 minutes if possible. 【Solution Example】 By applying 'FloroSurf FG-5093' to the nozzle, continuous molding for 120 minutes becomes possible! FloroSurf FG-5093 is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the molding resin to the surface is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It boasts excellent durability, with a proven track record of continuous release for thousands of shots, and its performance can be restored by reapplying with a brush or spray. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【Precision Molding Case】Successfully achieved continuous molding of shapes that are difficult with conventional release agents.

For cases where conventional release agents do not work well in molding precise surface shapes, please try Fluorosurf. There are numerous achievements in continuous molding.

"Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorine-based solvent. By applying it, the adhesion of the surface molding resin is reduced, and a layer of fluorine compounds at the nanometer level exhibits excellent release properties even for complex and precise shapes. It demonstrates its effectiveness in cases where conventional release agents do not work well. It has excellent durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Additionally, since the release agent does not adhere to the workpiece, cleaning after molding is unnecessary. Other examples are also included! *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Release Agent Example] Cleaning of molded products is unnecessary, enabling continuous release.

FloroSurf FG-5093 forms a dry release film on the mold surface. Release properties are improved, and cleaning of the molded products is unnecessary.

"FloroSurf FG-5093" is a mold release agent that dissolves a special fluororesin in a non-flammable fluorinated solvent. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents do not work well. It has outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. Additionally, the release agent components do not adhere to the molded products, eliminating the need for cleaning. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing ■ No need to remove the film during mold modifications ■ No transfer of release agent components, eliminating the need for cleaning of molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent, excellent release properties, PFOS and PFOA free, non-VOC.

A dry release film is formed on the surface of the mold. Release properties are significantly improved, and cleaning of the molded products is unnecessary. It is non-flammable and safe, plus it can be easily applied. It does not contain silicone-based compounds.

The "FloroSurf FG-5093" is a fluorine-based dry mold release agent. It is free of silicone, preventing contamination of molded products, and eliminates the need for cleaning the molded items. No regulated substances such as PFOS or PFOA are used. Additionally, it is not classified as a VOC. By applying it, the adhesion of the surface molding resin is reduced, demonstrating excellent release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work properly. It boasts excellent durability, with proven continuous release performance over thousands of shots, and reapplication with a brush or spray can restore its effectiveness. 【Features】 - Strongly adheres to mold materials, enabling continuous release. - The film thickness is only a few nanometers, suitable for nano and sub-micron level molds. - Can be easily applied with brushes or spray guns, eliminating the need for outsourcing processing. - No need to remove the film during mold modification. - No transfer of release agent components, eliminating the need for cleaning molded products. - Low odor and non-flammable, maintaining a good working environment. *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Fluorine Coating Agent Example] Easy to apply and improves mold release properties.

Dry fluorine-based mold release agent. Overwhelming continuous release performance. Please try it when conventional release agents do not work well. No cleaning of molded products required. Samples available.

The "Fluoro Surf FG-5093" is a mold release agent made by dissolving a special fluororesin in a non-flammable fluorine-based solvent. Additionally, it does not contain any PFAS regulated substances. With just one application, the adhesion of the surface molding resin is reduced, demonstrating excellent continuous release properties even for complex and precise shapes. It is particularly effective in situations where conventional release agents fail to work. It boasts outstanding durability, with a proven track record of continuous release over thousands of shots, and reapplication with a brush or spray can restore its performance. 【Features】 ■ Strongly adheres to mold materials, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds ■ Can be easily applied with a brush or spray gun, eliminating the need for outsourcing processing ■ No need to remove the film during mold reworking ■ No transfer of release agent components, eliminating the need for cleaning molded products ■ Low odor and non-flammable, maintaining a good working environment *If you would like a free sample, please include "Sample Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Other molds

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Continuous release is possible. Fluorine surface processing of molds at our own site. Non-transfer.

Please try this when conventional release agents do not work well. It offers overwhelming continuous release properties. It is easy to apply, can be applied on the molding site, and only requires 5 minutes of air drying at room temperature. No cleaning of the molded products is necessary.

The "Fluoro Surf FG-5093, 5095, 5097 Series" is a mold release agent made by dissolving a special fluoropolymer in a non-flammable fluorinated solvent. Just one application provides a non-stick surface on the mold. It reduces the adhesion of molding resins to the mold, demonstrating excellent continuous release properties even for complex and precise shapes. Please try it in cases where conventional release agents do not work well. It has excellent durability and a proven track record of continuous release, and its performance can be restored by reapplying with a brush or spray. 【Features】 ■ Strongly adheres to the mold material, enabling continuous release ■ The film thickness is only a few nanometers, suitable for nano and sub-micron level molds and nano-imprinting ■ Can be easily applied with brushes or spray guns, drying at room temperature in 10 minutes. No need for outsourcing processing ■ No need to remove the film during reapplication ■ No transfer of release agent components, eliminating the need for cleaning of molded products (FG-5093, 5095) ■ Low odor and non-flammable, maintaining a good working environment By applying it to the extrusion molding nozzle, it can also reduce haze. Free samples are available for trial (limited to corporations)! Please feel free to request.

Company：フロロテクノロジー
Price：Other

Coating Agent

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mold Release Agent(frp) - List of Manufacturers, Suppliers, Companies and Products

Mold Release Agent Product List

[Case] Continuous operation by reducing the formation of flash in extrusion molding nozzles.

【Precision Molding Case】Successfully achieved continuous molding of shapes that are difficult with conventional release agents.

[Release Agent Example] Cleaning of molded products is unnecessary, enabling continuous release.

Release agent, excellent release properties, PFOS and PFOA free, non-VOC.

[Fluorine Coating Agent Example] Easy to apply and improves mold release properties.

Continuous release is possible. Fluorine surface processing of molds at our own site. Non-transfer.